OPERATING INSTRUCTIONS
-3-
1 ON/OFF POWER BUTTON
Press this button to turn the unit on or off. If the unit is off and
the ignition switch is "on", the unit will turn on automatically
when a disc is inserted, or when the "MODE" switch or "BAND"
switch is pressed.
2 VOLUME / LEVEL CONTROL
To increase the volume level, press the button. The volume
will increase and the level will be shown on the display panel
from a minimum of “VOL 00” to a maximum of “VOL 39”. To
increase the volume quickly, keep the button pressed. To
decrease the volume level, press the button. Keep the button
pressed to decrease the volume quickly. The display will
automatically return to the normal indication 5 seconds after
the last volume adjustment or when another function is activated.
These buttons are also used in conjunction with the ''AUDIO
SELECT" (SEL) button 3 to adjust the bass, treble, balance,
and fader levels as described in 4, 5, 6 and 7.
3 AUDIO SELECT (SEL) BUTTON
This button is used to select the audio function (volume, treble,
bass, balance, or fade) to be adjusted using the Volume/Level
Control 2. Pressing the "SEL" button will select bass (“BAS”
on the display), treble ("TRE"), balance (“BAL”), fader
(“FAD”) or volume (“VOL”). The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated. The unit will produce a
single beep tone whenever the button is pressed.
4 BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
the "SEL" button 3 so that the “BAS” indication appears on the
display panel. Within 5 seconds of choosing the Bass mode,
press the or button of the Level Control 2 to adjust the
bass response as desired. The bass level will be shown on the
display panel from a minimum of -12 to a maximum of +12 (0
is flat response). The display will automatically return to the