-5-
or “FM3” will appear on the display panel according to your
selection.
During disc play, pressing this button will stop play of the disc
and switch to radio operation without ejecting the disc. During
this time, the IN indication will remain on the display panel
to show that a disc is still loaded in the unit. Press the "Mode"
button cr to return to disc play from the beginning of the last
track in play.
bm MANUAL UP/DOWN TUNING (+ / -)
AUTOMATIC SEEK TUNING
Each time the + button is tapped, the radio will tune one
frequency step higher. Similarly, each tap of the - button will
tune one frequency step lower. To manually tune in a station,
tap the button of the appropriate direction until the desired
frequency is reached.
Pressing either button for longer than 2.0 seconds and then
releasing will activate the Automatic Seek Tuning function. The
radio will seek the next available station and stop at that fre-
quency. The Seek function can be stopped by pressing the but-
ton again or activating any other tuning function.
bn AUTO-STORE TUNING (AS)
PRE-SET SCAN TUNING (PS)
During radio operation, press this button momentarily to scan
the 6 stations pre-set into the memories of that band. The unit
will stop at each pre-set station for 5 seconds before continuing
to the next pre-set station. During this time, the pre-set station
number ("CH") in the band will flash. Press the button again
momentarily to stop Pre-Set Scan operation and remain on
the selected frequency. The station number ("CH") stops
flashing.
Pressing the button for longer than 2 seconds will activate the
Auto-Store Tuning feature which will automatically scan the
band and enter up to 6 strong stations into the 6 pre-set
memories. After entering the stations into the memories, the
unit will automatically stop at each station for 5 seconds so each
can be heard. If you have already set the pre-set memories to
your favorite stations, activating the Auto-Store feature will erase
those stations and enter the new strong stations. This feature is
most useful when travelling in a new area where you are not
familiar with the local stations.
bo STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band, use the
following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual Up/Down
or Automatic Seek Tuning Controls bm.
3. Press the pre-set button ("1-6") to be set and continue to
hold it in. After approximately 2 seconds, the pre-set number
will appear on the display panel, indicating that the station is
now set into that pre-set memory position. The station can
now be recalled at any time by pressing that button.
4. Repeat the above procedure for the remain in pre-sets on
that band and for the other 4 bands on the unit.