dl THEFT-DETERRENT LED
Located on the chassis behind the front panel, a
dm RESET BUTTON
The RESET button is located to the right of the theft deterrent LED. The reset circuitry should only be activated under the following circumstances as it will erase the time and
1.Upon initial installation after all wiring is completed.
2.If there is a malfunction of any of the switches on the unit, pressing the RESET button may clear the system and return to normal operation.
dn FRONT PANEL RELEASE BUTTON (OPEN)
This button is used to release the mechanism that holds the front panel to the chassis. To detach the front panel, press the button so that the panel drops to the lowered position. Grasp the panel at the middle and pull it off of the chassis. To
doREMOTE SENSOR
The sensor to detect the infrared signal from the wireless remote control is located behind the LCD display lens. For optimum operation of the remote control, always aim the control at the LCD display.
NOTES ON USE OF FRONT PANEL
1.Make sure the front panel is positioned correctly when slid ing it into the front mounting plate, as it cannot be attached when
2.To verify correct panel installation, swing the panel as - sembly up into position until it locks easily into place. If any resistance is encountered,
3.When taking the front panel with you, please use the sup - plied carrying case to protect the panel from dirt and damage. Make sure there is no dust or dirt on the electrical terminals on the back of the panel as this could cause intermittent operation or other malfunctions.
THEFT DETERRENT | DISC SLOT | RESET BUTTON | |
(19) | |||
LED (30) | |||
(31) | |||
| |||
|
|
MOUNTING PLATE
GUIDE (2 PLACES) | CD EJECT BUTTON | |
(27) | ||
| ||
PANEL MOUNTING | FRONT PANEL | |
PLATE | ||
|