INSTALLATION INSTRUCTIONS

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Open, fold down and remove the detachable front panel, if it is attached to the chassis, by grasping the grooved center portion and pulling the panel assembly straight out. Slide the mounting sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or

file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be“on”). If unit does not operate, re-check all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

7.Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for the unit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully un-snap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION: DO NOT EXCEED M5 X 5 MM MAXIMUM SCREW SIZE. LONGER SCREWS MAY TOUCH AND DAMAGE COMPONENTS INSIDE THE CHASSIS.

4.Wire the new radio to the vehicle as per step 4 above.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

-2-

Page 1 Page 3
Page 2
Image 2
Audiovox P-950W installation manual Installation Instructions
Page 1 Page 3

P-950W specifications

The Audiovox P-950W is a versatile and innovative portable media player that has garnered attention for its impressive features and user-friendly design. Compact and lightweight, this device is tailored for on-the-go users who demand high performance and versatility in their media consumption.

One of the standout features of the P-950W is its high-resolution touchscreen display, which provides clear and vibrant visuals for photos, videos, and applications. The responsive interface allows for smooth navigation, ensuring that users can easily access their content without any hassle. With its impressive display size, users can enjoy their media in comfort, whether they're watching a movie during a long commute or browsing photos from a recent trip.

The Audiovox P-950W excels in audio performance, supporting a wide range of audio formats, including MP3, WMA, and WAV. This support enables users to create personalized playlists for any occasion, making it an ideal choice for music lovers. Additionally, the device features built-in speakers that deliver clear sound, while the headphone jack allows for a more private listening experience.

Connectivity is another defining aspect of the P-950W, as it includes both USB and HDMI ports. This versatility allows users to connect the device to external displays for a larger viewing experience, perfect for sharing videos with friends or family. The USB port also enables fast charging and easy transfer of media files, enhancing the overall user experience.

With a substantial internal storage capacity, the Audiovox P-950W can accommodate a variety of media content. Users can store thousands of songs, numerous movies, and a vast array of photos, all accessible with just a few taps. Furthermore, the device supports expandable memory through microSD cards, ensuring that users never have to worry about running out of space.

In terms of battery life, the P-950W does not disappoint. With efficient power management, the device is capable of providing hours of usage on a single charge, making it perfect for long journeys or extended use away from a power source.

Overall, the Audiovox P-950W is a well-rounded portable media player that combines a user-friendly interface, robust audio performance, ample storage, and versatile connectivity options. Whether for personal entertainment or sharing moments with others, the P-950W stands out as a reliable choice for multimedia enthusiasts.
Top Page Image Contents