INSTALLATION INSTRUCTIONS

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at 1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Open, fold down and remove the detachable front panel, if it is attached to the chassis, by grasping the grooved center portion and pulling the panel assembly straight out. Slide the mounting sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be “on”). If unit does not operate, re-check all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION:The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

7.Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for the unit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully un-snap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION: DO NOT EXCEED M5 X 8 MM MAXIMUM SCREW SIZE.

LONGER SCREWS MAY TOUCH AND DAMAGE COMPONENTS INSIDE THE CHASSIS.

4.Wire the new radio to the vehicle as per step 4 above.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

-2-

Page 1 Page 3
Page 2
Image 2
Audiovox P-955 installation manual Installation Instructions
Page 1 Page 3

P-955 specifications

The Audiovox P-955 is a versatile device that stands out due to its impressive array of features and capabilities tailored for both casual users and audiophiles alike. As a portable multimedia player, it combines functionality with sleek design, catering to the modern lifestyle.

One of the main features of the Audiovox P-955 is its high-resolution LCD display, which enhances the viewing experience for videos and images. With vibrant colors and sharp details, users can enjoy their media content in stunning clarity. The device supports a variety of file formats, allowing playback of videos, music, and picture files without the hassle of conversion.

In terms of audio performance, the Audiovox P-955 excels. It incorporates advanced audio technologies to deliver rich sound quality, ensuring that music playback is not only enjoyable but also clear and immersive. Whether listening through built-in speakers or connecting to external headphones or speakers via the headphone jack, users can expect a fulfilling auditory experience.

Additionally, the P-955 features an intuitive user interface designed for ease of navigation. Users can effortlessly switch between different media types and access their files, playlists, and settings. The interface is responsive and user-friendly, making it accessible for users of all ages.

Connectivity is another area where the P-955 shines. Equipped with multiple connectivity options, including USB ports for easy data transfer and charging, as well as compatibility with various devices, this player ensures that users can connect and integrate it into their digital ecosystem seamlessly. It also includes memory expansion slots for additional storage, providing flexibility in managing media files.

Battery life is crucial for portable devices, and Audiovox has delivered on this front as well. The P-955 boasts a long-lasting battery that allows users to enjoy extended playback across various media without the need for frequent recharging. This feature is particularly advantageous for those who are frequently on the go or traveling.

Finally, the Audiovox P-955 appeals to users with its sleek design. Lightweight and easy to carry, the device is aesthetically pleasing while maintaining durability. The combination of functionality, advanced technology, and modern design makes the Audiovox P-955 an attractive choice for anyone seeking a reliable multimedia player. Whether at home, during travel, or on the move, this device is engineered to deliver an exceptional multimedia experience.
Top Page Image Contents