Audiovox P-99A 1, 2, 3

-1-

1ON/OFF POWER BUTTON

Press this button to turn the unit on or off. The unit will also turn on

automatically when a compact disc is inserted if the ignition switch

is “on” or when any front panel button is pressed.

2VOLUME / LEVEL CONTROL

To increase the volume level, turn the knob clockwise. The

volume will increase and the level will be shown on the display

panel from a minimum of “VOL 00” to a maximum of “VOL 63”. To

decrease the volume level, turn the knob counter-clockwise. The

display will automatically return to the normal indication 5 seconds

after the last volume adjustment or when another function is acti-

vated. These buttons are also used in conjunction with the Select

button 3 to adjust the bass, treble, balance, and fader levels as

described in 4, 5, 6 and 7.

3SELECT BUTTON (SEL)

CONFIRMATION TONE SELECTOR ( )

This button is used to select the audio function (volume, treble,

bass, balance, or fade) to be adjusted using the Level Control 2.

Pressing the Select button once will set the unit for treble ad-

justment (“TRE” will appear on the display panel). Pressing the

button additional times will select bass (“BAS” on the display), bal-

ance (“BAL”), fader (“FAD”) or volume (“VOL”). The display will

automatically return to the normal indication 5 seconds after the

last adjustment or when another function is activated.

Pressing and holding the button for longer than 2 seconds will

activate the Confirming Tone feature as indicated by two beep

tones and the indication appearing on the display panel. When

activated, the unit will produce a single beep tone whenever a