lNever insert anything other than a 5" (12 cm) compact disc into the player as the mechanism can be damaged by foreign objects.
lDo not attempt to use 3" (8 cm)
lWhen not using the disc player, always remove the compact disc. Do not leave an ejected disc sitting in the disc slot as this can expose it to sunlight and other causes of damage.
lDo not attempt to open the unit chassis. There are no user serviceable parts or adjustments inside.
lWhen the vehicle warms up during cold weather or under damp conditions, moisture may condense on the lens of the disc player. Should this occur, the player will not operate properly until the moisture has evaporated.
lTheunitisdesignedwithavibrationdampeningCDmechanismto minimize interruption of disc play due to normal vibration in a moving vehicle. When driving on very rough roads, however, occasional sound skips may occur. This will not scratch or damage the disc and normal play will resume when the rough conditions cease.
As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep it in good working condition. The following simple care and maintenance suggestions should be followed to prevent malfunctions of the cassette system.
Cassette Care:
1.Purchase a cassette cleaning kit from your local retail store. Use it! At least every 20 to 30 hours of operation you must
clean the cassette mechanism. A dirty cassette player will have a poor sound.
2.Do not use cassettes that exceed 45 minutes of play on each side.
3.Do not insert a cassette that appears to be broken, twisted or dirty or with loose or torn labels on it.
4.Always keep your cassettes away from direct sunlight or exposure to
5.Do not keep a cassette in the player when not in use.
6.Before inserting a cassette in the player, check that the tape is tightly wound on the reels.
Take up any excess slack using a pencil to turn the drive hub in the cassette (see diagram).
