INSTALLATION INSTRUCTIONS

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Open, fold down and remove the detachable front panel, if it is attached to the chassis, by grasping the grooved center portion and pulling the panel assembly straight out. Slide the mounting sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or

file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be“on”). If unit does not operate, re-check all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

7.Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for the unit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully un-snap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION: DO NOT EXCEED M5 X 5 MM MAXIMUM SCREW SIZE. LONGER SCREWS MAY TOUCH AND DAMAGE COMPONENTS INSIDE THE CHASSIS.

4.Wire the new radio to the vehicle as per step 4 above.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

-2-

Page 1 Page 3
Page 2
Image 2
Audiovox P953 manual Installation Instructions
Page 1 Page 3

P953 specifications

The Audiovox P953 is a versatile and innovative multimedia system designed to enrich your in-car entertainment experience. This sleek, compact device encapsulates various features that make it a standout option for those who appreciate high-quality audio and video while on the road.

At the heart of the Audiovox P953 is its 9-inch LCD display, which boasts vibrant colors and sharp resolution, allowing for an immersive viewing experience. The screen can be swiveled and tilted to ensure viewers in the rear seats can enjoy their favorite movies or shows from various angles. This makes the P953 an excellent choice for family trips, keeping passengers entertained and engaged for hours.

One of the standout features of the Audiovox P953 is its compatibility with multiple media formats, including DVDs, CDs, and digital files. This flexibility enables users to enjoy a wide range of content, from classic films to the latest releases, enhancing the versatility of your entertainment options. The device also supports USB drives and SD cards, allowing for easy access to stored videos and music files.

In addition to its video prowess, the Audiovox P953 is equipped with built-in Bluetooth technology. This feature enables wireless connectivity with compatible devices, allowing you to sync your smartphone or tablet for seamless streaming of music and audio. The hands-free calling capability adds a layer of convenience, making it easier to stay connected without compromising on safety while driving.

The Audiovox P953 also excels in audio performance, with integrated speakers that deliver a robust sound experience. The device may also support external audio systems for those looking to elevate their sound setup further.

Moreover, the P953 is designed with user-friendliness in mind. The intuitive interface and remote control provide easy access to all features while ensuring that controls are straightforward for passengers to use. With its sleek design and modern aesthetics, the Audiovox P953 complements any vehicle's interior, making it a stylish addition as well as functional.

In summary, the Audiovox P953 is a cutting-edge multimedia system that blends exceptional video and audio performance with user convenience. Its compatibility with various media formats, integrated Bluetooth technology, and elegant design make it a worthy investment for anyone seeking a premium in-car entertainment experience. Whether it’s for long road trips or daily commutes, the Audiovox P953 stands out as a reliable companion for enhancing your travels.
Top Page Image Contents