Audiovox PAB-450R manual High Performance Stereo Amplifier, Specifications

HIGH PERFORMANCE STEREO AMPLIFIER

This power amplifier has been designed to provide high quality performance with a minimum of maintenance. However, it's performance will only be as good as the care and quality of components with which it is installed. We therefore advise that you read these instructions very carefully to familiarize yourself with the product and it's features.

Should you require assistance with the installation or wiring of this unit, please call our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.

HELP!

1-800-645-4994

Monday - Friday	8:30am - 7:00pm Eastern
Saturday	9:00am - 5:00pm Eastern

SPECIFICATIONS

Maximum Output Power:
4-Channel Operation:	100 watts x 4
2-Channel Operation:	200 watts x 2
Output Power @ 0.05% T.H.D.:
4-Channel Operation:	50 watts RMS x 4
2-Channel Operation:	125 watts RMS x 2
Output Impedance:	2 - 8 ohms (stereo)
	4 - 8 ohms (mono)
Frequency Response:	10 - 50,000 Hz. ± 1 dB
Channel Separation:	50 dB
Signal / Noise Ratio:	90 dB (A-Weighted)

Input Impedance:	low-level 10K ohms
	high-level 100 ohms
Input Sensitivity:	low-level 200 mv. - 4 v.
	high-level 2 - 10 v.
Filter Types:	low-pass and hi-pass
Filter Slope:	18 dB/octave
Filter Crossover:	50 - 180 Hz. (variable)
Bass Boost:	+12 or 18 dB @ 45 Hz.
	(selectable)
Supply Voltage:	12 volts, negative ground
Fuse Rating:	20 amps. x 2

Dimensions (W x H x D): 10-3/4" x 2-3/8" x 11-1/2" 273 mm x 62 mm x 290 mm

*Due to continuing improvement, Audiovox reserves the right to change features and design without notice. -1-