If necessary, remove the door opening handle any accessory. Unless screws are holding the door panel to the door frame, which is very rare, you will find that most door panels are se- cured by spring clips.

3.Using a broad flat tool between door and door panel, un- fasten spring clips. If a few clips are bent when removing them, a pair of pliers will easily re-form them. Once all clips are unfas- tened, lift off door panel.

NOTE:On cars equipped with power windows, seats, etc., it may be necessary to free the power switch plate, usually mounted to the driver’s side arm rest, in order to fully separate the door panel from the frame.

Removing the Door Panel

1.This opening would have to be enlarged per dotted line

2.Possible speaker opening

3.Remove paper liner

4.Padded door panel

5.Window crank

6.Door latch

7.Screws

8.Clip pins

Selecting Speaker Location

After removing the door panel, you are ready to select a location for the speaker. Make this selection as follows:

1.When the steel sub-door panel is exposed, you may find the panel completely or partially covered by brown or black paper secured with a sticky-black, tar-like adhesive. Do not tear this paper off. It is there to insulate the door, to trap

moisture, and to reduce wind noise.

2.Carefully unpeel the paper. (Do not do this if speaker openings are exposed.) You should now be able to see all the varied size openings available in the sub-steel door. The reason for exposing all the existing holes is to avoid cutting metal unless it is absolutely necessary.

3.Now determine which existing holes will accommodate your speakers. Temporarily install the window crank; place the speaker into the opening and, while holding the speaker in place, fully raise and lower the window. Check that no moving part touches the speaker while opening or closing the window. Then open and close the door and inspect for speaker interference.

4.If you are satisfied with the selected location, you can begin the installation process. But first, visually check the padded door panel to verify that nothing on it will interfere with installing the speaker grille (an armrest, for example).

5.If the selected location is acceptable, proceed to Speaker Mounting, step 2; if the location needs to be changed, continue with Speaker Mounting, step 1.

-5-

Page 4 Page 6
Page 5
Image 5
Audiovox PS-2655, PS-2351, PS-2652, PS-2525, PS-2401 owner manual Selecting Speaker Location, Removing the Door Panel
Page 4 Page 6

PS-2525, PS-2652, PS-2351, PS-2401, PS-2655 specifications

Audiovox has established itself as a reputable name in the consumer electronics market, particularly known for its high-quality portable audio products. Among its offerings, the PS series, which includes the PS-2655, PS-2401, PS-2351, PS-2652, and PS-2525, stands out with a blend of advanced features and technologies tailored for audio enthusiasts.

The PS-2655 is designed to provide robust sound performance in a portable format. Boasting Bluetooth connectivity, this model allows seamless pairing with a variety of devices, enabling users to enjoy their favorite playlists without the hassle of wires. With a powerful rechargeable battery, the PS-2655 ensures long hours of playback, making it an ideal companion for outdoor events or long trips.

Moving on to the PS-2401, this model emphasizes compactness without compromising audio quality. It features a sleek design that is easy to carry, making it suitable for users who are always on the go. Its built-in microphone facilitates hands-free calling, ensuring that users can maintain communication while enjoying their music.

The PS-2351 continues the trend of portability while enhancing the soundscape with advanced audio technologies. Equipped with noise isolation technology, it minimizes environmental disturbances, allowing for pure audio immersion. Additionally, the PS-2351 supports multiple audio formats, catering to a diverse user base with varied listening preferences.

Next in the lineup is the PS-2652, which integrates cutting-edge wireless charging capabilities. This feature simplifies the recharging process, eliminating the need for cumbersome cables. The PS-2652 also showcases customizable EQ settings, allowing users to tailor the sound profile to their liking, whether they prefer deep bass or balanced treble.

Finally, the PS-2525 rounds out the series with its durable construction and water-resistant features, ideal for outdoor usage. This model not only offers excellent sound output but also incorporates voice assistant compatibility, enabling users to control their music with simple voice commands.

In conclusion, the Audiovox PS series presents a diverse array of features and technologies, catering to modern consumer needs for portability, sound quality, and convenience. Each model, from the PS-2655 to the PS-2525, introduces unique characteristics that elevate the listening experience, making them suitable for various lifestyles and preferences. Whether for casual listening or more serious audio engagement, the PS series offers something for everyone.
Top Page Image Contents