Audiovox SP-6CD Procedure For Vertical Installation, PROCEDURE FOR 45 ANGLE INSTALLATION

PROCEDURE FOR VERTICAL INSTALLATION

1

lConfirm that the built-in anti-vibration springs on both the left and right sides are set to the vertical installation position "V".

lAttach bracket (L) and bracket (R) using the hexagonal bolts (M5 x 8).

2

3

Determine the mounting location and drill four mounting holes.

Never mount the unit near the fuel tank.

Drill holes 4mm in diameter.

Secure the unit in place, using four self-tapping screws (M5 x 12).

Self-tapping screw (M5 x 12)

PROCEDURE FOR 45° ANGLE INSTALLATION

1

2

lConfirm that the built-in anti-vibration springs on both the left and right sides are set to the 45° installation position "45°".

lAttach bracket (L) and bracket (R) using the hexagonal bolts (M5 x 8).

Determine the mounting location and drill four mounting holes.

Never mount the unit near the fuel tank.

Drill holes 4mm in diameter.

3

Secure the unit in place using four self-tapping screws (M5 x 12).

Self-tapping screw (M5 x 12)

4