Audiovox Stereo System manual ~ .~, PRECAUnONS

~:.~

LCD (LIQUID CRYSTAL DISPLAY) MONITOR

The operation of the LCD monitor is a very simplc operation. There are two brightness buttons on the unit for increasing brightness (+) and decreasing brightness (-). These buttons MIl adjust brightness for the type ofvideo source being used, and also adjust for the vicMng angle. SeeFigure I. The color and the tint of the monitor are factory preset, but if the monitor is ever in need of adjustment there are color and tint controls on rear of monitor. SeeFigure 2.

PRECAUnONS:

*Use the unit in the temperature ranges of O C to 60 C (32 F to 140 F).

*Do not push on the LCD display, forcibly pushing on the display may damage the picture quality of the unit.

*When using unit in cold surroundings, delayed or double images may appear. This is not a defect of the unit. When the monitor warms up, the video will becomenormal again.

*Clean unit with a soft cloth slightly dampened with a mild detergent. A strong solvent used to clean the monitor can damage the finish of the unit.

*Due to the extreme manufacturing tolerances required, even in a high quality screen, it is IX>ssiblethat the display might evidence a few dots {black or colored) on the screen. These dots are considered normal.

FIGURE

00

,.-

6

-

0

00

FIGURE2

(2)

LCDl-4