Wired FM Modulator
Your video system may be equipped with an RF modulator, that allows you to listen to the VOH560’s audio signal by tuning your vehicle’s radio to the selected frequency, (88.7 or 89.1 - check with your installer) and turning on the remote mounted RF modulator switch. (In most cases this toggle switch will be located underneath the driver’s side of the dash, check with your installer for the exact location.) Whenever the RF modulator is on, broadcast radio reception will be poor. Turning the remote mounted toggle switch off will allow normal radio reception.
Optional Video Monitor(s)
The VOH560 provides a video output for an optional video monitor(s). (Refer to page 6 of the installa- tion guide for more details.) This output will provide a video signal that duplicates the signal displayed by the VOH560 to an additional monitor or video display. AVP756 provides monitor port for another optional monitor as well. Please see your installer for more information.
Aux Video 2
When the video select button is pressed to access Video 2, Video 2 does not light up due to the video mute circuit unless there is a video source signal being applied into the second source.
