Remote Controlled Radio Functions
8.AUTO MEMORY BUTTON
When the AUTO MEMORY button is pressed, all channels in TV mode are searched and tuned; all the channels with signals detected are automatically stored. Please refer to page 2 for more information on TV reception.
9.SKIP/SEARCH BUTTON
This button selects between SKIP and SEARCH mode. In “SKIP mode” the TV only stops on channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When the SKIP mode is off, the TV will stop on all active channels.
10.ERASE/WRITE BUTTON
When tuned to a channel press this button to store or erase the channel from memory. The stored channel numbers are displayed in “GREEN” on the screen and the
Remote Controlled Radio Functions
11.FM RADIO POWER ON/OFF
Press this button to turn the FM Radio On. The radio station frequency will be displayed on LCD display window. Press the button again to turn the FM Radio Off.
12.MUTE BUTTON (FOR FM RADIO)
Press this button to remove the sound at the headphone station. Pressing the button again restores sound to the previously set level.
13.RECALL BUTTON
Press the recall button to recall channel 1 to 6 from memory. Each press of the recall button will advance the station number. Stop pressing the RECALL button when the desired station preset
14.TUNING UP/DOWN BUTTONS
Press the tuning UP/DOWN button to tune the radio frequency from a low to high frequency channel. The radio is tuned in 200 kHz step size. Pressing and holding the tuning buttons for more than two seconds will result in rapid radio tuning to the next strong station as displayed on the LCD window.
15.VOLUME UP/DOWN BUTTONS
Press the volume UP/DOWN button to increase or decrease the volume levels of the headphone jack.
16.MEMORY BUTTON
Tune to the desired radio station frequency. Press the memory button repeatedly until the desired preset number is displayed. Press and hold the memory button. MEM0 will appear in the display. The radio station frequency is now stored in the preset number.
128-6116
8 of 16
