positions on the surface until an audio output is heard. The desired antenna position should be marked with masking tape or by another non-scratch method.

d.After determining the optimum position, turn off Xpress XM power, disconnect the power adapter from the vehicle cigarette lighter receptacle and disconnect the antenna cable.

e.Plan the routing of the antenna cable to the

cradle. Make sure you avoid any obstructions

ANTENNA

that could crimp, kink or twist the cable; use

 

protective grommets wherever rough openings

 

are encountered.

 

f. Route the cable from the antenna position to

 

the interior of the vehicle, working the cable

 

under the rear window molding; make

 

adjustments and take up slack whenever

 

necessary.

 

-13-

ROUTING

THE CABLE

128-7472

13 of 16

Page 13
Image 13
Audiovox XMC10 manual Antenna