8
To reduce the risk of bodily injury from lifting, the following assembly steps #s 7 an d 8 will require two people.
CAUTION
!
Step 7Hood/Body To Cart Assembly
Lift the Hood/Body Assembly over the car t assembly and set it down until it rests on the top of the cart legs.
Align the holes in the side of the Body with the holes in the legs. Insert t wo 1/4-20 x .50 Bolts through the holes in the
firebox flanges (Back Left Side View) an d into threaded inserts in the inside face of the back legs. Inser t two 1/4-20
x 1.50 Bolts through the holes in the front legs (Right Side View) and into threaded insert s in firebox flanges. Tighten
after all are installed.
Right Side View
1/4-20 x .50” Bolt set
2 pc
Back
Left Side View
1/4-20 x 1.50” Bolt set
2 pc