3 Center Channel
Mounting
1.For mounting to Symbol Subwoofer, remove four black bolts from top surface of subwoofer cabinet.
2.Locate Center Channel / Mounting Bracket assembly over the four mounting holes as shown in Figure 3.1. DO NOT DISASSEMBLE CENTER CHANNEL FROM BRACKET.
3.Tighten four black bolts with 5/32 Allen wrench until snug.
4.Connect Center Channel wiring via rear terminals. BE SURE TO OBSERVE PROPER POLARITY (+ /
Holes for mounting
Center Channel to Wall
Holes for mounting
Center Channel to Sub 
Figure 3.1 – Center Channel mounting holes
6