AVALON RF, INC. Page 6
RT423 User’s Guide & Operating Manual
2.5 Mechanical
2.5.1 Mounting.
Mounting can be done in one of the following methods:
a) Clamping.
Clamping (or hard mounting) is the recommended method and the
only method of mounting in all fixed installations or when operating
from >10V.
Clamping is also the preferred method of mounting in mobile
installations where most electrical interfaces are used.
b) Clip on.
Avalon RF offers a clip on kit. This method is acceptable when
operating from a 9V battery and only one or two interfaces are in
use.
c) Velcro® to a flat surface.
The RT423 may be mounted using Velcro® if it is required to be
detached frequently. However, in this case it must be operated
from a 9V battery.