Avalon Stoves Astoria Bay warranty Pellet Insert Dimensions, Minimum Fireplace & Clearances

1.Easy Fuel Loading. Insert top lifts up and locks open to allow easy access for pellet loading.

2.Adjustable Hopper. Hopper is adjustable to accommodate fireplace height. The higher the fireplace, the larger the hopper pellet capacity.

3.Heavy-Duty Auger. Precision auger feeds pellet fuel to the firepot on the automatic or manual feed rate settings.

4.Two-Stage Heat Exchanger. Combination of 10 heat exchange tubes and rear heat exchange plenum gains maximum heat transfer from the insert to your home.

5.Air Tube Scraper. Concealed under the loading door, this easy-to- use, pull rod removes ash from the air exchange tubes with no mess or special tools.

6.Super-Quiet Combustion Blower. Variable speed control allows you to turn the blower down in conjunction with the feed rate.

7.Low Profile. Designed to fit into fireplaces only 20” tall.

8.4” Pellet Vent. Exhaust uses convenient low cost pellet vent.

Hopper Capacity	Heating Capacity*	Burn Times
Adjustable		Depending on Hopper Capacity
Min 48 lbs	800 to 2,250 Sq. Ft.	On Low -28 -52 Hours
Max. 89 lbs.		On High -8-16 Hours

9.Auger Motor. A heavy-duty gear motor with metal gears, low r.p.m. and high torque, ensures long life and reliability.

10.Exhaust Vent Designed Into Hopper Corner. Vertical vent is designed to be hooked up without requiring additional space in the rear of the

11.Variable Speed Convection Blower. This quiet blower draws cool room air around the firebox and two-stage heat exchanger to deliver heated air to your home.

12.Standard Ignitor. Reliable ignition system to make firestarting easy as the flip of a switch, or automatic with the wall thermostat.

13.Ash Dump. No tools required, the ash drop makes ash clean-up in the firebox a simple, mess free operation.

14.Convenient Ash Pan. Designed for ease of removal and disposal.

15.State-of-the-Art Circuit Board Operation. Operate your pellet insert manually or automatically with the use of a wall thermostat for the ultimate in hands free operation.

16.Wall Thermostat. Standard with unit.

17.Seven Year Warranty. Lifetime on stainless steel burn pot

Efficiency	BTU Range	Burn Feed Rate	Glass Viewing
Up To	Low - 13,940	Per Hour	Area
		1.7 lbs. on Low
82%	High - 45,100		321 Sq. In.
		5.5 lbs. on High

*Heating capacity may vary depending on degree of home insulation, floor plan and ambient temperature zone of the area in which you live. Contact your local building or fire officials about installation requirements in your area.

Pellet Insert Dimensions Minimum Fireplace & Clearances

Flue is 16 7/8” high and 7 1/2” left of center

32”

26 1/2”

28”

Use these illustrations as a guide only.

For installation instructions please contact your Avalon Dealer or go to www.avalonstoves.com

NOTE: Improper installation of your pellet appliance or failure to operate it according to the guidelines detailed in the

Owner's Manual may negate your warranty and endanger your home and family.

251/2”

20” to 25 3/4”

Tested by

OMNI-Test Laboratories, Inc to

ASTM E 1509-95. This pellet fired

8 3/4”**

. in ”M 18

42” Min.

6”**

20” to

25 3/4”*

3
6”	Min.	14” Min.

*Depending

on hopper

height

33” to 38”

Depending on

Mantle Depth

45”

8" x 10" Panels: Maximum Coverage 32" H x 45" W

			appliance has been tested and listed
			for use in manufactured homes in
	13 1/	4”	accordance with Oregon Administrative
			Rules 814-23-900 through
12”			814-23-909.

32 3/4”

36”

Minimum

**Sidewall and Top Facing Clearance to Combustible measured from hopper lid.

™

www.avalonstoves.com

Your Authorized Avalon Dealer Is:

© 2004 T. I.
AVALON reserves the right to improve our product at any
time without prior notice. Photos are for aesthetic purposes
only and may not reflect actual installation requirements.	#98800206