Avanti BCA5102SS-1 instruction manual Operating Your Beverage Center

OPERATING YOUR BEVERAGE CENTER

It is recommended you install the Beverage Center in a place where the ambient temperature is between 23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 1º-6ºC/34º-43ºF may not be reached.

BCA5102SS-1

BCA5105SG-1

You can select temperature display setting from Fahrenheit to Celsius degree by touching the ºF/ºC mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display window.

ON/OFF POWER

To turn OFF the appliance, touch the ON / OFF or

mark and hold for 2 seconds.

Control Panel Lock (Model BCA5105SG-1 ONLY).

•Your Wine chiller is equipped with an automatic Control panel lock function. This function will prevent any unwanted changes to your temperature or power settings.

•The lock function will activate automatically 12 seconds after the last time a button is pushed on the control panel.

•To unlock the control panel lock press and hold the (↑) and the (↓) buttons for 3 seconds the control panel will beep and blink once indicating that the control panel is active and the settings can be changed.

SETTING THE TEMPERATURE CONTROL

•You can set the temperature as you desire by touching the UP or DOWN mark. When you touch the two marks for the first time, the LED readout will show the original temperature set at previous time (the temperature preset at the factory is 3ºC/38ºF).

•The temperature that you desire to set will increase 1ºF or 1ºC if you touch the UP mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you touch the DOWN mark once.

•The temperature inside the unit will be appeared in blue color in the display window.

NOTE:

•If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the Beverage Center will not start.

•When you use the Beverage Center for the first time or restart the Beverage Center after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the Beverage Center is running for a few hours everything will be back to normal.

10