Avanti CF99PS, CF63 Problems With Your Freezer, Troubleshooting Guide, Energy Saving Tips

Energy Saving Tips

The freezer should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight.

Let hot foods cool to room temperature before placing in the freezer. Overloading the freezer forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.

Be sure to wrap foods properly, and wipe containers dry before placing them in the freezer. This cuts down on frost build-up inside the freezer.

Freezer storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners

interfere with cold air circulation, making the freezer less efficient.

Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible

PROBLEMS WITH YOUR FREEZER

You can solve many common freezer problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

PROBLEM		POSSIBLE CAUSE
Freezer does not operate.		Not plugged in.
		The circuit breaker tripped or a blown fuse.
		The freezer temperature control is set at "0/OFF".
Compressor turns on and off frequently.		The room temperature is hotter than normal.
		A large amount of food has been added to the
		freezer.
		The door is open too often.
		The door is not closed completely.
		The temperature control is not set correctly.
		The door gasket does not seal properly.
		The freezer does not have the correct clearances.
		The freezer has recently been disconnected for a
		period of time. Four hours are required for the
		freezer to cool down completely.
Temperature inside the freezer is too warm.		Temperature control is set too warm.	Turn the
		control to a cooler setting and allow several hours
		for the temperature to stabilize.
		Door is kept open too long or is opened too
		frequently. Warm air enters the freezer every time
		the door is opened. Open the door less often.
		The door is not closed completely.
		The door gasket does not seal properly.
		A large amount of warm or hot food might have
		been stored recently. Wait until the freezer has
		had a chance to reach its selected temperature.
		The freezer has recently been disconnected for a
		period of time. Four hours are required for the
		freezer to cool down completely.
Temperature inside the freezer is too cold.		Temperature control is set too cold.	Turn the
		control to a warmer setting and allow several
		hours for the temperature to stabilize.
		Fast Freeze switch is turned on. This causes
		continuous running of the compressor and
		bypasses the temperature control.
Temperature of external freezer surface is warm.		The exterior freezer walls can be as much as 30F
		warmer than room temperature. This is normal
		while the compressor works to transfer heat from
		inside the freezer cabinet.
	12