IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electrical shock, or injury when using your refrigerator
•Read all instructions before using the
•DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
•Before you throw away your old
•Never allow children to operate, play with, or crawl inside the
•Never clean
•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other
INSTALLATION INSTRUCTIONS
¾Before Using Your Appliance
•Remove the exterior and interior packing.
•Check to be sure you have all of the following parts:
Refrigerator Section | Freezer Section | ||
2 | – Wire Shelves | 1 | – Wire Shelf |
1 | – Crisper | 2 | – Door Bins |
1 | – Glass Crisper Lid |
|
|
1 | – Can Dispenser Rack |
|
|
3 | – Door Bins |
|
|
•Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
•Clean the interior surface with lukewarm water using a soft cloth.
¾Installation of Your Appliance
•Place your
•Allow 5 inches of space between the back and sides of the unit, which allows the proper air circulation to cool the compressor and condenser.
•Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the refrigerator- freezer not to perform properly.
•Avoid locating the unit in moist areas.
•Plug the unit into an exclusive properly
7
