circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.
ELECTRICAL CONNECTION
WARNING
IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS SERVICE CENTER.
•This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a
•Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
•Never use an extension cord to connect power to the unit.
•Never use a
•Where a
•This appliance requires a standard 115/120 volts a.c.~/60hz electrical ground outlet with
•The cord should be secured behind the appliance and not left exposed or dangling, in order to prevent accidental injury.
•The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevents overloading of house wiring circuits, which could result in a fire hazard. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a
¾CONNECTING THE WATER SUPPLY
•Review the state and local plumbing codes before you install the unit. All the necessary hardware is not provided for installation so you must hire a professional licensed plumber to complete the installation.
•Connect tubing (supplied with unit) to the nearest cold water source. Connect sufficient tubing to the unit to allow the appliance to be moved freely for cleaning and service. Also make sure that the tubing is not pinched or damaged during transportation.
•Position unit to allow free airflow through the front grille (see sketch 1). Wipe off inside of unit and ice bucket with a damp cloth.
8