Avanti MO7191TW Setting a Cooking Program, One-stage Cooking Multi-stage Cooking, Speed Defrost

SETTING A COOKING PROGRAM

A. One-stage Cooking		B. Multi-stage Cooking
1.	Use the number pads to set a cooking time.	You can program oven for 4 cooking stages. Each
	You can set a cooking time from one second to	stage can be programmed with a different power
	99 minutes and 99 seconds.	level and time. To program 2-stage, 3-stage or 4-
2.	If you want to set a power level other than	stage cooking, repeat the one-stage cooking steps
	100% power, touch POWER, then use the	1 and 2 and touch START. The oven will
	number pads to enter the power level. You can	automatically proceed to the end of cooking
	set the power level from 1 to 9.	stages.
	Use single digits to set a cooking power level:

				NOTE:
					After stage 1 time has elapsed, one beep
					sound, signaling the beginning of stage 2. After
		Number pad	Cooking power		total time has elapsed, 4 beeps sound and END
		9	90%		appears in display. Touch RESET pad or open
					oven door to clear END before starting another
		8	80%
					cooking function.
		7	70%
		6	60%
		5	50%
		4	40%
		3	30%
		2	20%
		1	10%
3. Touch START/STOP to start cooking.
SPEED DEFROST
1.	Touch SPEED DEFROST.			DEFROST BY WEIGHT
2.	Enter desired defrosting time by touching
				1.	Touch DEFROST BY WEIGHT pad.
	correct number pads. Digital timer sets minutes
				2.	Enter weight.
	and seconds from left to right so a single digit
				3.	Touch START/STOP pad.
	can be set (5 for 5 seconds ) or up to 4 digits
				Note:
	(2405 for 24 minutes 5 seconds).
				Weight must be in pounds and ounces.
3.	Touch START/STOP.
				Ounce weights less than 10 must be preceded by
NOTE:				a 0. If label gives weight in pounds only, change
				the fraction of a pound to ounces using the
After time has elapsed four signals sound and END
				following chart (See page 19).
appears in display. Touch RESET pad or open door
to clear END before starting another cooking
function.

12