Energy Saving Tips

The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight.

Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.

Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.

Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the appliance less efficient.

Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.

Try not to open the door too often, especially when the weather is wet and hot.

Every so often check if the appliance is sufficiently ventilated.

Ice and frost layer increase energy consumption, so clean the appliance as soon as the layer is ¼” thick.

PROBLEMS WITH YOUR APPLIANCE?

You can solve many common appliance problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE

Appliance does not operate.

Not plugged in.

 

The circuit breaker tripped or blown fuse.

Appliance does not cool.

The appliance temperature control is set at “0”

Compressor turns on and off frequently.

Condenser coil at the back of the unit is dirty.

 

The room temperature is hotter than normal.

 

A large amount of food has been added to the

 

appliance.

 

The door is open too often.

 

The door is not closed completely.

 

The temperature control is not set correctly.

 

The door gasket does not seal properly.

 

The appliance does not have the correct

 

clearances. (5” to both sides and back of unit)

The light does not work.

The home circuit breaker or fuse has tripped.

 

The appliance is unplugged.

 

The bulb has burned out (see the maintenance

 

section for the replacement procedure).

Vibrations.

Check to assure that the appliance is level.

The appliance seems to make too much noise.

The rattling noise may come from the flow of the

 

refrigerant, which is normal.

 

As each cycle ends, you may hear gurgling

 

sounds caused by the flow of refrigerant in your

 

appliance.

 

Contraction and expansion of the inside walls

 

may cause popping and crackling noises.

 

The appliance is not level.

The door will not close properly.

The appliance is not level.

 

The doors were reversed and not properly

 

installed.

 

The gasket is dirty.

 

The shelves, bins, or baskets are out of position.

11

Page 11
Image 11
Avanti RA758WT, RA759PST  Energy Saving Tips, Problems with Your APPLIANCE?, Troubleshooting Guide Problem Possible Cause

RA758WT, RA759PST specifications

The Avanti RA758WT and RA759PST are two standout compact refrigerators designed to deliver optimal cooling performance while fitting seamlessly into a variety of spaces, making them ideal for apartments, dorms, and offices.

The Avanti RA758WT features a sleek white finish that adds a touch of elegance to any room. It has a storage capacity of 7.5 cubic feet, making it spacious enough to accommodate food, beverages, and snacks. The refrigerator section includes an adjustable glass shelf, allowing users to customize the interior layout based on their storage needs. The RA758WT also comes with a separate freezer compartment, which is perfect for storing ice and frozen meals.

On the other hand, the RA759PST offers a modern stainless steel design that enhances its aesthetic appeal. Similar to the RA758WT, it offers ample storage space, featuring a capacity of 7.9 cubic feet. This model is equipped with a sophisticated thermostat that ensures precise temperature control, guaranteeing food freshness. The RA759PST also includes an energy-efficient LED interior lighting system, making it easy to find items, even in low-light conditions.

Both refrigerators are designed with energy efficiency in mind, incorporating technologies that minimize energy consumption while maximizing cooling efficiency. The adjustable shelves in both models allow users to store tall bottles and larger items with ease. Furthermore, the reversible doors provide flexibility in placement, enabling the user to optimize their space better.

In terms of cooling technology, the Avanti models utilize a dynamic cooling system that maintains consistent temperatures throughout the refrigerator. This ensures that food remains at its optimal freshness. Both models also include a can dispenser and door bins, maximizing storage convenience by keeping beverages easily accessible.

In summary, the Avanti RA758WT and RA759PST are versatile and functional compact refrigerators that cater to diverse storage requirements. With their stylish designs, energy-efficient performance, customizable shelving, and effective cooling technologies, they offer an excellent solution for those looking to enhance their living or working spaces while enjoying the benefits of modern refrigeration. These models reflect Avanti's commitment to quality and innovation, making them reliable choices for consumers seeking compact refrigeration options.