OPERATING YOUR BEVERAGE COOLER
Temperature Control
TO PREVENT LIQUIDS FROM FREEZING YOU MUST ADJUST THE TEMPERATURE CONTROL TO THE MEDIUM SETTING AFTER THE INITIAL 24 HOUR PERIOD OF USE.
Setting the Temperature Control
Your Beverage Cooler has only one control for regulating the temperature. The temperature control is located on the upper right hand corner of the compartment.
To control the internal temperature, adjust the control knob according to the ambient temperature or purpose of use.
The first time you turn the unit on, set the temperature control to “HI”.
The range of the temperature control is from position "OFF” to “HI”.
After 24 hours, adjust the temperature control to the setting that best suites your needs. The setting of “MED” should be appropriate for home or office Beverage Cooler use.
NOTE:
Turning the temperature control to "OFF" position stops the cooling cycle but does not shut off the power to the appliance.
Interior Light
This Beverage Cooler is provided with a LED light located on the top of the compartment. The light is manually activated and will not be on when the door is opened and be off when the door is closed. To turn the light ON / OFF use the switch located and the top right hand side of the unit.
CARE AND MAINTENANCE
Defrosting Your Beverage Cooler
This model uses a superconductor
Cleaning Your Beverage Cooler
UNPLUG the Beverage Cooler, and remove the shelf.
Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.
Wash the shelf with a mild detergent solution.
The outside of the Beverage Cooler should be cleaned with mild detergent and warm water.
Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.
9
