CONNECTING THE WATER SUPPLY HOSES
The water supply hose must be connected to the washing machine at one end and to the water faucet at the other. Do not stretch the water supply hose. If the hose is too short and you do not wish to move the water faucet, replace the hose with a longer,
Select appropriate faucet as shown in the figures below. If none of these faucets are available, use the faucet adapter provided.
The end of faucet spout should be longer than 10mm (0.4”), or the connector cannot be fixed properly. Water leakage could develop.
Note: The Hot Water Connector Lid is inside the accessories bag;
If only cold water is supplied, take the Hot Water Connector Lid from the accessories bag and screw it onto the “Hot Water Connector”
If you have both cold and hot water supplied, connect the inlet hoses by matching cold to cold and hot to hot.
11
