?When you store mostly white wines, the temperature needs to be set at between 50 to 59? F and the LED lamp above “WHITE” will be lit.
?When you store mostly sparkling wines, the temperature needs to be set at between 45 to 49? F and the LED lamp above “SPARKL” will be lit.
?You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ? C button. You can select temperature display setting from Celsius to Fahrenheit degree by pushing the ? F button. Fahrenheit and Celsius degrees indicator will appear on display.
SPARKL: | SPARKLING WINES/ROSE WINES | 45- 49? F |
WHITE: | WHITE WINES/DRY | 50 - 59? F |
RED: | RED WINES | 60 – 65? F |
NOTE:
?Put power switch to “OFF” position stops the cooling cycle but does not shut off the power to the appliance .
?If the unit is unplugged, has lost power, or is turned off; you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the appliance will not start.
STORAGE
Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able to store may vary.
INTERIOR LIGHT
?You can turn the interior light on by pushing the LIGHT ON/OFF button.
?The light will turn off automatically if it remains ON for 10 minutes or more.
?Otherwise turn it off by pushing the LIGHT ON/OFF button.
DOOR LOCK
The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door do the reverse operation marking sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.
CARE AND MAINTENANCE
REPLACING YOUR LIGHT BULB
NOTE:
All parts removed must be saved to do the replacement of the light bulb.
Before removing the light bulb, either unplug the appliance or disconnect the electricity leading into the appliance at the main power supply. Failure to do so could result in electrical shock or personal injury.
?Press the power switch to the “OFF” position.
?Remove the screw “5”.
?Remove the light bulb cover “4” by pulling the bottom end of the light bulb cover gently.
?Unscrew the bulb “2”.
?Replace with a
?Replace the light bulb cover “4” and tighten screw “5”.
10
