¾ON/OFF POWER

To turn OFF the appliance, press the ON/OFF button.

¾SETTING THE TEMPERATURE CONTROL

You can set the temperature as you desire by pushing the UP or DOWN button. When you push the two buttons for the first time, the LED readout will show the original temperature set at previous time (the temperature preset at the factory is 12ºC/54ºF).

The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN button once.

When you store mostly red wines, the temperature which you control by pushing the above two buttons need to be set at between 15º - 18ºC/58º - 65°F and the LED lamp under “RED” will be lit red.

When you store mostly white wines, the temperature needs to be set at between 9º - 14ºC/48º - 57°F and the LED lamp under “WHITE” will be lit green.

When you store mostly sparkling wines, the temperature needs to be set at between 5º - 8ºC/40º - 47°F and the LED lamp under “SPARKL” will be lit amber.

The temperature inside the unit will be appeared in blue color in the display window.

NOTE:

If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the Wine Chiller will not start.

When you use the wine chiller for the first time or restart the wine chiller after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the wine chiller is running for a few hours everything will be back to normal.

¾STORAGE

Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able to store may vary.

NOTE: You can place 40 standard bottles in this wine chiller.

Bottle capacities are approximate maximums when storing traditional Bordeaux 750ml bottles and include bulk storage.

¾INTERIOR LIGHT

You can turn the interior light ON or OFF by pushing the button marked with the “bulb” symbol . The light will be turned off automatically if it remains ON for 10 minutes. You have to push the button

marked with the “bulb” symbol again and the light will turn back on.

¾DOOR LOCK

Your unit is provided with a lock and key combination.

The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.

¾SHELVES

The appliance is equipped with the wired shelves with wooden front insert. You can move the shelves out and in smoothly.

To prevent damaging the door gasket, make sure to have the door all the way opened when pulling the bottom shelf out of the rail compartment.

For easy access to the storage content, you must pull the shelf approximately 1/2 out of the rail compartment, however this unit was designed with a plastic post on each sides of the shelf track to prevent bottles from falling.

When removing the shelf out of the inner rail, make sure to remove all items first. Then move the

10

Page 10
Image 10
Avanti WC400SS ¾ ON/OFF Power, ¾ Setting the Temperature Control, ¾ Storage, ¾ Interior Light, ¾ Door Lock, ¾ Shelves