IMPORTANT SAFEGUARDS

Before the wine chiller is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the wine chiller, follow basic precautions, including the following:

•Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord

•Replace all panels before operating

•It is recommended that a separate circuit, serving only your wine chiller, be provided. Use receptacles that cannot be turned off by a switch or pull chain

•Never clean wine chiller parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

•Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.

•Do not connect or disconnect the electric plug when your hands are wet

•Unplug the wine chiller or disconnect the power before cleaning or servicing. Failure to do so can result in electrical shock or death.

•Do not attempt to repair or replace any part of your wine chiller unless it is specifically recommended in this material. All other servicing should be referred to a qualified technician.

•Use two or more people to move and install the wine chiller. Failure to do so can result in back or other injury.

•To ensure proper ventilation for your wine chiller, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 550F (130C) and below 900F (32 0C). This unit must be installed in an area protected from the elements, such as wind, rain, water spray or sunlight.

•The wine chiller should not be located next to ovens, grills or other sources of high heat.

•The wine chiller must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.

•Do not kink or pinch the power supply cord of the wine chiller.

•The fuse (or circuit breaker) size should be 15 amperes.

•It is important for the wine chiller to be leveled in order to work properly. You may need to make several adjustments to level it.

•All installation must be in accordance with local plumbing code requirements.

•Make certain that the pipes are not pinched or kinked or damaged during installation.

•Check for leaks after connection.

•Never allow children to operate, play with or crawl inside the wine chiller

•Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or discolor the interior.

•Do not use this apparatus for other than its intended purpose.

4

Page 3 Page 5
Page 4
Image 4
Avanti WC494D instruction manual Important Safeguards
Page 3 Page 5

WC494D specifications

The Avanti WC494D is a compact yet innovative refrigerator that stands out for its efficient performance and modern design. Aimed at consumers who value both space and functionality, this model is particularly adept at fitting into smaller kitchens, dorm rooms, or office environments without sacrificing storage capabilities.

One of the defining features of the Avanti WC494D is its versatile dual-door configuration. With separate compartments for fresh and frozen items, users can easily organize their food and beverages. The refrigerator section includes adjustable shelves that allow for customizable storage options, accommodating larger items when needed. Meanwhile, the freezer compartment, though small, is perfect for storing ice cream, frozen vegetables, and other essentials.

In terms of energy efficiency, the Avanti WC494D is designed to consume less power, making it not only economical but also environmentally friendly. It typically boasts an energy star rating, meaning that it meets strict efficiency guidelines set by the U.S. Environmental Protection Agency. This can lead to significant savings on electricity bills over time.

The refrigerator is also equipped with a reversible door, providing the flexibility to choose the door swing direction that best fits your space. This thoughtful design detail enhances usability, especially when dealing with tight environments.

Another hallmark of the Avanti WC494D is its built-in cooling technologies. The unit employs a compressor cooling system, which ensures consistent temperatures throughout the compartments, preserving food freshness. Furthermore, it operates quietly, which is an important consideration for users living in close quarters or shared spaces.

Accessibility is further enhanced by the interior lighting and easy-to-use temperature controls, allowing users to quickly adjust settings according to their needs. The adjustable thermostat provides the ability to maintain optimal cooling conditions, whether for dairy products, fruits, or beverages.

Overall, the Avanti WC494D combines practical features with modern design, making it a prominent choice for anyone in need of reliable refrigeration in a compact form factor. With its energy efficiency, versatile storage options, and user-friendly technology, it is well-equipped to meet the demands of contemporary lifestyles while enhancing the overall kitchen experience.
Top Page Image Contents