8

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR WINE CHILLER
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
1
Instruction Manual
5
Large Shelves
1
Small Shelf
2
Keys
1
Left lower door hinge
1
Right insert
• Before connecting this appliance to the power source, let it stand upright for appr oximately 2
hours. This will reduce the possibility of a malfunction in the coo ling system from handling
during transportation.
• Clean the interior surface with lukewarm water using a sof t cloth.
INSTALLATION OF YOUR WINE CHILLER
• This appliance is designed to be for free standing installat ion or built-in (fully recessed).
• Place your Wine Chiller on a floor that is strong enou gh to support it when it is fully loaded. To
level your Wine Chiller, adjust the front le ve lin g legs at the bottom of the Wine Chiller.
• Locate the Wine Chiller away from direct sunlight and sourc es of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and he at sources may increa se electrical
consumption. Extreme cold ambient temperatures may also caus e the unit not to perform
properly.
• Avoid locating the unit in moist areas.
• Plug the Wine Chiller into an exclusive, properly installed-grounde d wall outlet. Do not under
any circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified e lectrician or an
authorized Avanti Products service center.
BUILT – IN CABINET INSTRUCTIONS
This unit is designed for both built-in or free standing installation. If you plan to use this unit in a built-
in application please follow the requirements shown to the ri ght.

← Figure shown

Cabinet Opening Dimensions
IN (min)
MM (min)
Width
24”
610 mm
Depth
26”
661 mm
Height
35”
889 mm
Figure shown →
Unit Dimensions
IN (min)
MM (min)
Width
23 1/2”
597 mm
Depth
(with handle)
24 ½”
623 mm
Depth
(without Handle)
22 ¾”
578 mm
Height
35”
889 mm