Manuals / Avanti / Kitchen Appliance / Refrigerator

Avanti WCR5403SS instruction manual Installation Instructions,  Before Using Your Wine Chiller

Models: WCR5403SS

1 20
Download 20 pages 37.11 Kb
Page 7
Image 7

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

∙Read all instructions before using the Wine Chiller.

∙DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

∙Before you throw away your old Wine Chiller: Take off the door. Leave the shelves in place so that children may not easily climb inside.

∙Never allow children to operate, play with, or crawl inside the appliance.

∙Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.

∙Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

-Save these instructions-

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR WINE CHILLER

∙Remove the exterior and interior packing.

∙Check to be sure you have all of the following parts:

∙6 Large Shelves

∙1 Bottom Shelf

∙2 Keys

∙1 Stainless Steel Handle Assembly with 2 Screws, 2 Flat Washers and 2 Lock Washers

∙1 Door Lower Hinge Bracket for Door Opening from the Right Side

∙1 Instruction Manual

∙Before connecting the Wine Chiller to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

∙Clean the interior surface with lukewarm water using a soft cloth.

∙Install the handle on the left side of the door.

INSTALLATION OF YOUR WINE CHILLER

∙This appliance is designed to be for free standing installation or built-in (fully recessed).

∙Place your Wine Chiller on a floor that is strong enough to support it when it is fully loaded. To level your Wine Chiller, adjust the front leveling legs at the bottom of the Wine Chiller.

∙Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

∙Avoid locating the unit in moist areas.

∙Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

7

Page 6 Page 8
Page 7
Image 7
Avanti WCR5403SS Installation Instructions,  Before Using Your Wine Chiller,  Installation of Your Wine Chiller
Page 6 Page 8

WCR5403SS specifications

The Avanti WCR5403SS is a stylish and efficient wine cooler that caters to wine enthusiasts, combining modern aesthetics with cutting-edge technology. Designed to provide an optimal storage environment for up to 54 bottles of wine, this cooler is perfect for any home, bar, or entertainment space.

One of the standout features of the WCR5403SS is its dual-zone cooling system. This technology allows users to store different types of wine at their ideal temperatures, ensuring proper aging and preservation. The upper zone typically accommodates white wines at cooler temperatures, while the lower zone is perfect for red wines, which are best stored a bit warmer. Each zone can be set independently, providing flexibility and catering to various wine preferences.

The wine cooler is equipped with a robust thermoelectric cooling system, which offers quiet operation and minimizes vibrations. This is crucial for wine storage, as vibrations can disturb the sediments in the bottles, potentially affecting the wine's taste and quality. Additionally, the thermoelectric system is energy-efficient, making it a sustainable choice for eco-conscious consumers.

Aesthetically, the Avanti WCR5403SS is designed with a stainless steel frame and a tempered glass door, providing a sleek and modern look that complements any décor. The interior is illuminated with soft LED lighting, allowing for easy viewing of your wine collection while minimizing heat emission, which can harm the wine.

The wine cooler features adjustable wooden shelves that not only add a touch of elegance but also provide a sturdy and stable resting place for the bottles. These shelves can be customized to accommodate various bottle sizes, from standard 750ml bottles to larger formats, ensuring versatility in storage options.

User-friendly controls make it easy to set and monitor the temperature within both zones. Digital temperature displays provide clear visibility and allow for precise adjustments, making it simpler to maintain optimal wine storage conditions.

With its excellent combination of functionality, style, and technology, the Avanti WCR5403SS wine cooler is an ideal choice for both novice wine drinkers and seasoned connoisseurs. Its ability to maintain the perfect environment for wine storage and display makes it not only a practical appliance but also a statement piece in any setting.