WARNING

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

•Read all instructions before using the Wine Chiller.

•DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

•Before you throw away your old Wine Chiller: Take off the door. Leave the shelves in place so that children may not easily climb inside.

•Never allow children to operate, play with, or crawl inside the appliance.

•Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.

•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

-Save these instructions-

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR WINE CHILLER

•Remove the exterior and interior packing. Read the Installer’s Directions.

•Check to be sure you have all of the following parts:

•5 Roll-out Shelves

•1 Small Bottom Shelf

•2 Keys

•1 Stainless Steel Handle Assembly with 2 Screws, 2 Flat Washers and 2 Lock Washers

•1 Door Lower Hinge Bracket for Door Opening from the Right Side

•1 Instruction Manual

•Before connecting the Wine Chiller to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

•Clean the interior surface with lukewarm water using a soft cloth.

•Install the handle on the left side of the door.

INSTALLATION OF YOUR WINE CHILLER

•This appliance is designed to be for free standing installation or built-in (fully recessed).

•Place your Wine Chiller on a floor that is strong enough to support it when it is fully loaded. To level your Wine Chiller, adjust the front leveling legs at the bottom of the Wine Chiller.

•Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

•Avoid locating the unit in moist areas.

•Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

ELECTRICAL CONNECTION

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.

Page 6 Page 8
Page 7
Image 7
Avanti WCR683DZD-1 Installation Instructions,  Before Using Your Wine Chiller,  Installation of Your Wine Chiller
Page 6 Page 8

WCR683DZD-1 specifications

The Avanti WCR683DZD-1 is a versatile wine cooler designed for wine enthusiasts and connoisseurs looking to enhance their storage solution. This wine cooler can hold up to 68 standard 750 ml bottles, making it an excellent choice for small to medium-sized collections. Its sleek and compact design allows it to fit perfectly in various spaces, whether in your kitchen, dining area, or wine cellar.

One of the standout features of the WCR683DZD-1 is its dual-zone cooling system. This allows users to store red and white wines at their optimal temperatures simultaneously. The upper zone, with a temperature range of 54°F to 64°F, is perfect for red wines, while the lower zone, which can be set between 46°F and 66°F, is ideal for whites and sparkling wines. This flexibility ensures that your wines are always ready to serve at their best.

The cooler is equipped with a sophisticated digital temperature control system. The easy-to-read LCD display allows for quick adjustments to the temperature settings, ensuring precise control. Moreover, it features a high-quality compressor for improved cooling efficiency and temperature stability, which is essential for preserving the integrity of your wine.

In terms of design, the WCR683DZD-1 boasts a black stainless-steel exterior combined with a stylish glass door. This combination not only elevates your décor but also provides UV protection to shield your wine from harmful light exposure. The adjustable wooden shelves add an aesthetic appeal while also allowing for customizable storage options to accommodate bottles of various sizes.

The wine cooler operates quietly, ensuring that it won't disrupt your home environment. Its energy-efficient design reduces power consumption, making it an eco-friendly option for wine storage. Additionally, the WCR683DZD-1 features a built-in security lock, providing peace of mind that your collection is safe.

Overall, the Avanti WCR683DZD-1 is an ideal choice for wine lovers seeking effective storage solutions, combining style and functionality in one unit. With its impressive features designed to enhance the wine storage experience, it makes an excellent addition to any home.
Top Page Image Contents