IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electrical shock,

WARNINGor injury when using your appliance, follow these basic precautions:

∙Read all instructions before using the Wine Chiller.

∙DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

∙Before you throw away your old Wine Chiller: Take off the door. Leave the shelves in place so that children may not easily climb inside.

∙Never allow children to operate, play with, or crawl inside the appliance.

∙Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.

∙Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

-Save these instructions-

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR WINE CHILLER

∙Remove the exterior and interior packing.

∙Check to be sure you have all of the following parts:

∙6 Burgundy Bottle Shelves

∙8 Standard Bottle Shelves

∙1 Small Standard Bottle Shelf

∙1 Bottom Shelf

∙2 Keys

∙1 Upper Door Hinge for Reversing Door Opening to the Right Side

∙1 Instruction Manual

∙Before connecting the Wine Chiller to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

∙Clean the interior surface with lukewarm water using a soft cloth.

∙Install the handle on the left side of the door.

INSTALLATION OF YOUR WINE CHILLER

∙This appliance is designed to be free standing or recessed with a minimum clearance of ¼ inch on each side and at the back.

∙This appliance is not designed for built-in installation (zero clearances).

∙Place your Wine Chiller on a floor that is strong enough to support it when it is fully loaded. To level your Wine Chiller, adjust the front leveling legs at the bottom of the Wine Chiller.

∙Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

∙Avoid locating the unit in moist areas.

∙Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

7

Page 6 Page 8
Page 7
Image 7
Avanti WCR684C Installation Instructions,  Before Using Your Wine Chiller,  Installation of Your Wine Chiller
Page 6 Page 8

WCR684C specifications

Introducing the Avanti WCR684C, a sophisticated wine cooler designed for both amateur wine enthusiasts and seasoned collectors alike. With its stylish appearance and advanced technologies, this wine refrigerator is perfect for preserving your favorite vintages while adding a touch of elegance to any space.

One of the standout features of the Avanti WCR684C is its impressive capacity, accommodating up to 68 standard wine bottles. This sizeable interior is organized into determined shelves that are designed to hold your collection safely and securely. The shelves are made of wood, providing a traditional aesthetic while also promoting optimal storage conditions.

Temperature control is crucial when it comes to wine preservation, and the Avanti WCR684C offers precise dual-zone temperature settings. With a range from 41°F to 64°F, the cooler caters to both red and white wines, allowing you to store your collection at the ideal temperatures. This feature ensures that the wines mature perfectly, enhancing their flavors and aromas over time.

The cooler utilizes advanced cooling technology for consistent temperature maintenance without vibrations that can disturb the sediment in bottles. The compressor cooling system ensures that the cooler runs efficiently, maintaining a stable environment for your wines. Additionally, the unit is equipped with a tempered glass door that not only showcases your wine collection but also effectively blocks UV rays, helping to protect the wine from light exposure.

Another innovative feature of the Avanti WCR684C is its LED interior lighting, which illuminates your collection with a soft glow. This feature not only enhances visibility but also adds to the overall aesthetic appeal of your wine cooler. The digital control panel located at the top also allows for easy temperature adjustments, ensuring you can quickly access the perfect setting for your wines.

With a sleek black finish and stainless-steel accents, the Avanti WCR684C complements any decor style. Its compact design makes it ideal for placement in living rooms, kitchens, or outdoor entertaining spaces. Ideal for wine aficionados who appreciate quality, the Avanti WCR684C offers a blend of style, functionality, and innovative technology to ensure that your precious wines are preserved in the best possible conditions.
Top Page Image Contents