OPERATION INSTRUCTIONS

Before Using Your Water Dispenser

•Check to be sure the following parts are included:

Instruction manual

4 extra cup dispenser cabinet plugs

Accessories order form.

1 height adjustment platform assembly (2 panels, 1 stability ring, 4 screws)

•Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

•The water dispenser is pre-cleaned at the factory but the reservoir and water lines must be flushed with fresh water before use as follows:

•Keep the unit unplugged.

•Fill water tank with tap water full to capacity (more than 3/4 of a gallon). Wait for 5 minutes until water settles.

•Press the hot water faucet until water comes out, then stop.

•Plug the dispenser into the electrical outlet. Both heating and cooling indicator lights on front will light up at first. We are ready to complete the first cycle. In order to do that, wait for the hot water indicator light to go off first (approximately 10 minutes), then wait for the cold water indicator light to go off (another 40 minutes, approximately).

•Unplug the dispenser from the electrical outlet. Proceed to drain the water from the faucets one at a time until no more water remains.

(Note: To facilitate this operation, use a large container).

•Then, drain any water left in the tanks by opening the drain plug located on the back, until it drains completely.

•Proceed to close the drain cap.

•Place the 5-gallon bottle of water on the water intake, allow water to stand for approximately one minute.

•Open water faucets to insure water flows from both faucets.

•Plug dispenser into the electrical outlet.

•Now you are ready to use your water dispenser.

NOTE: Your water dispenser has been cleaned and sanitized before leaving the factory, but in case a taste problem develops, place two tablespoons of baking soda and add tap water. Fill water tank again and repeat basic operations previously outlined, except turn the switch marked HOT “OFF” to avoid leaving residues in hot water tank.

ATTENTION:

If you do not plan to use the water heating function for more than three days, we recommend that you turn the HOT switch to the “OFF” position.

WARNING

IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS SERVICE CENTER.

9

Page 8 Page 10
Page 9
Image 9
Avanti WD362BP instruction manual Operation Instructions, Before Using Your Water Dispenser
Page 8 Page 10

WD362BP specifications

The Avanti WD362BP is a versatile and compact washer and dryer combo designed for small living spaces without compromising on performance. This innovative unit is a perfect solution for urban dwellers, college students, or anyone who needs efficient laundry capabilities in a limited area.

One of the main features of the Avanti WD362BP is its space-saving design. With dimensions of approximately 33 inches in height, 23.5 inches in width, and 22 inches in depth, it easily fits into closets, laundry nooks, or even kitchen areas. Despite its compact size, the unit offers a generous washing capacity of up to 13 pounds and can dry up to 8 pounds of laundry, making it suitable for various household needs.

The Avanti WD362BP employs advanced technology to enhance its functionality. It features a direct drive motor, which not only reduces noise levels during operation but also minimizes vibrations, allowing for quiet laundry sessions. With a range of wash programs and water levels, users can customize their wash cycles based on the specific fabric types and soil levels, ensuring optimal cleaning results.

Energy efficiency is another standout characteristic of the Avanti WD362BP. It is designed to use less water and electricity compared to traditional washer and dryer units, making it an environmentally friendly choice. The appliance is also equipped with a built-in lint filter, preventing lint from recirculating back into the wash and keeping your laundry cleaner.

The unit boasts a user-friendly control panel that allows for easy programming. Its LED display provides real-time information on the cycle status, while clearly labeled buttons help users select their desired options quickly.

In terms of aesthetics, the Avanti WD362BP features a sleek, modern design with a white finish, making it an attractive addition to any home. Its compact nature combined with its striking appearance and advanced features makes it an ideal choice for anyone in need of an efficient laundry solution without sacrificing style.

Overall, the Avanti WD362BP is a practical and advanced washer and dryer combo that combines convenience, efficiency, and modern technology. It stands out as an ideal solution for those looking to maximize laundry capabilities in tight living spaces.
Top Page Image Contents