?Press the hot water faucet button until water comes out, then release it.

?Plug the dispenser into the electrical outlet. Both heating and cooling indicator lights on front will light up at first. We are ready to complete the first cycle. In order to do that, wait for the hot water indicator light to go off first (approximately 10 minutes), then wait for the cold water indicator light to go off (another 40 minutes, approximately).

?Unplug the dispenser from the electrical outlet. Proceed to drain the water from the faucets one at a time until no more water remains. (Note: To facilitate this operation, use a large container).

?Then, drain any water left in the tanks by opening the drain plug located on the back, until it drains completely.

?Proceed to close the drain cap. Also make sure both faucet buttons are released.

?Place the 5-gallon bottle of water on the water intake, allow water to stand for approximately one minute.

?Press the water faucet buttons to insure water flows from both faucets.

?Plug dispenser into the electrical outlet.

?Now you are ready to use your water dispenser.

NOTE: Your water dispenser has been cleaned and sanitized before leaving the factory, but in case a taste problem develops, place two tablespoons of baking soda and add tap water. Fill water tank again and repeat basic operations previously outlined, except turn the switch market hot “OFF” to avoid leaving residues in hot water tank.

ATTENTION:

If you do not plan to use the water heating function for more than three days, we recommend that you turn the hot switch to the “OFF” position.

?WARNING?

IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS SERVICE CENTER.

OPERATING YOUR WATER DISPENSER

Steps To Replace Water Bottles

?Use a clean cloth to wipe off neck of bottle.

?Remove cap.

?Carefully lift bottle (approx. 40 lbs.) using your legs and not your back. Do not place hands on opening of bottle while placing in reservoir.

?Insert the water bottle on the water intake over reservoir opening so it settles properly on it.

?Wipe off any water which may have splashed on dispenser top.

When a new bottle is installed you must open the hot water faucet and remove no less than 4 full cups of water to insure the water flows properly and the water reservoir is at the proper level.

?Cold Water Control

Turn the cooling switch (13) on. The green indicator (4) will be lit and the process begins. When the water reaches the right temperature the green light goes off automatically.

?Hot Water Control

Turn heating switch (12) on, the red indicator (2) will be lit and the unit will begin to heat the water. When

6

Page 5 Page 7
Page 6
Image 6
Avanti WDP69 Operating Your Water Dispenser, ?Warning?, Steps To Replace Water Bottles, ? Hot Water Control
Page 5 Page 7

WDP69 specifications

The Avanti WDP69 is a powerful washing machine designed to cater to the needs of modern households, combining efficiency, performance, and ease of use in a sleek and compact design. It is ideal for those looking for a reliable laundry solution without compromising on space or functionality.

One of the standout features of the Avanti WDP69 is its impressive 6.9 kg capacity, making it suitable for small to medium-sized families. This capacity allows users to wash larger loads in one go, saving both time and energy while ensuring that clothes come out clean and fresh. The machine offers a selection of wash cycles, including normal, delicate, heavy-duty, and quick wash, allowing for optimal washing tailored to various fabric types and soil levels.

The Avanti WDP69 incorporates advanced technologies designed to improve cleaning efficiency and reduce water and energy consumption. Its high-efficiency motor minimizes vibration and noise during operation, providing a quieter washing experience that’s especially appreciated in apartment settings. Additionally, the machine features a clear LED display, making it easy to monitor settings and remaining time on each cycle.

Another notable characteristic of the Avanti WDP69 is its stackable design. This feature is particularly beneficial in urban homes where space is at a premium, enabling it to be conveniently placed on top of a compatible dryer. The unit is also designed with a durable stainless steel drum that not only extends the lifespan of the appliance but also enhances the overall washing performance.

Users will appreciate the self-cleaning option, which helps maintain the machine's hygiene by eliminating bacteria and detergent residues. Furthermore, the Avanti WDP69 is equipped with a variety of water temperature settings, ensuring that users can select the ideal temperature based on the laundry load.

In terms of safety, this model includes features such as a child lock to prevent accidental operation, ensuring peace of mind for families with young children. The Avanti WDP69 is a notable choice for those seeking an efficient, user-friendly, and compact washing machine that meets the demands of today’s households. Whether it's tackling daily laundry or special items, this model stands out with its blend of versatility and innovation, making laundry less of a chore and more of a simple task.
Top Page Image Contents