Avaya CIB 3236 Communications System's Power Is Off , Communications System's Power Is On

PARTNER is a registered trademark of Avaya Inc. in the U.S. and other c ountries. 2

The Port Card may be installed in the PARTNER Messaging module when the communications system's

power is on or off. Follow the applicable set of instructions below:

Communications System's Power Is Off

1. Hold the Port Card with the front label facing to the right and slide it gent ly into Card Slot 1 (the

leftmost card slot) on the PARTNER Messaging module. When inserted proper ly, the Port Card

projects out about 1½” from the module, and the letter “e” in the word “M essaging” (on the Port Card’s

label) is approximately aligned with the edge of the module.

2. Power up the communications system.

3. PARTNER Messaging starts up.

4. Check the LED on the front of the PARTNER Messaging module. The LED will bl ink several times

and at different rates.

5. The System Status LED will turn steady green when the PARTNER Messaging system has

successfully started.

NOTE:

If the LED is off, steady red, or steady amber, remove the Port Card and reinsert i t. If the condition

persists, contact your local Authorized Dealer or call the Avaya Technic al Services Center toll-free on

1.800.628.2888.

Communications System's Power Is On

1. If one is already installed, remove the Port Card from the PARTNER Messag ing module.

2. To insert the Port Card, hold it with the front label facing to the right and slide it gently into Card Slot 1

(the leftmost card slot) on the PARTNER Messaging module. When inserted properly, the Port Card