INTRODUCTION
The 2PSWT is a 2 position sequencing, homing switcher. The front panel toggle switch allows for automatic sequencing, or homing of the 2 video inputs. Sequencing is controlled by a front panel recessed dwell pot. This pot is recessed to eliminate accidental adjustment. The dwell adjustment varies from approximately .2 second to 60 seconds.
OPERATION
When the toggle switch is in the up position the switcher homes to camera #1. When the toggle switch is in the down position the switcher homes to camera #2. When the toggle switch is in the center position the switcher sequences between the two cameras.
DWELL
The dwell or time that each camera appears on screen can be adjusted by the recessed front panel control. This can be varied from approximately .2 second to 60 seconds. Use a small flat bladed screwdriver to adjust this control. Turning this pot to the right increases the dwell time.
POWER
The switcher is powered by the included wall transformer. The unit can be powered from 5 to 12VDC. The center post of the DC Coax is POSITIVE.
CONNECTIONS
The VIDEO inputs are BNC type connectors. The inputs are 75 ohm terminated and require 1V
3
