1.3Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
1.4Introduction
Avenview
approach for converting Component (YPbPr) and/or VGA with either digital S/PDIF or analog stereo audio to
HDMI. With
can connect to HDMI TV or projector at low cost.
-HDMI 1.2a compliant
-Support VGA resolution of up to UXGA (1600x1200 or WUXGA (1920x1200)
-Supports HD (1080i / 720p) component video
-Coaxial S/PDIF audio input
-Stereo analog audio input
-Front panel LED indicators
-Easy installation
1.5Package Contents
Before you start the installation of the converter, please check the package contents.
- | x 1 | |
- VGA to Component Adapter | x1 | |
- | Power Adapter (+5VDC, 4A) | x1 |
- | User’s Manual | x1 |
1.6Before Installation
∙Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
∙Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
www.avenview.com | 4 |
|
|