1.3Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
1.4Introduction
The DVI-C5-M-SET, DVI over Single CAT5 Extender Mini extends your PC DVI transmission distance up to 25m (80ft) at 1024x768 and 15m (50 ft) at 1920x1200 resolutions. With DVI-C5-M-SET, users can transmit high quality digital video of PC applications through one cost effective CAT-5/5e LAN cables to the remote monitor or projector, instead of using short and expensive DVI cables. With embedded EDID inside the adapter, your PC will continue to send the digital video even when the monitor is not connected. The user can then disconnects the monitor, place it in a remote location and reconnect it without rebooting the operating system.
The DVI-C5-M-SET includes two units: transmitting and receiving units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor. While successfully connected, the two LED lights on the RJ-45 connector will blink. The transmission distance between the sending (transmitter) and receiving units (receiver) can be up to 25m (80ft) at XGA (1024x768) and 15m (50ft). With compact size, DVI-C5-M-SET is the most cost effective choice for bringing your impressive digital video to the remote display.
-DVI 1.1 compliant
-Extends the transmission length from the sources up to 25m (80ft) at 1024x768 and 15m (50ft) at 1920x1200
-Units can used as Transmitter or Receiver
-Receiving unit can learn EDID information for DVI enabled display device
-Direct plug-in at Transmitter and Receiver
1.5Package Contents
Before you start the installation of the converter, please check the package contents.
- | DVI-C5-M-S | x 1 |
- | DVI-C5-M-R | x 1 |
- | User’s Manual | x 1 |
