Avenview
1.Power on your display
2.Connect Transmitter to the DVI of display
3.Plug the DC power of Transmitter
4.Pull out after about 5 – 10 seconds for reading the EDID information from the display
5.Connect Transmitter to the PC and Receiver to the Display.
6.At the same time, connect DC power to the receiver
7.Connect the optical fiber between Transmitter and Receiver.
8.Restart the computer.
1.8General Troubleshooting
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Problem |
|
| Possible Solution |
|
|
|
|
|
|
|
|
|
|
| ∙ Check if the PC Power is on |
|
|
|
|
| ∙ Check if connection to the computer and the monitor are |
|
| No Image |
|
| correct. |
|
|
|
|
| ∙ Check the optical fiber connection |
|
|
|
|
| ∙ Turn the PC Power off and on again. |
|
| Screen Defects Appear |
|
| ∙ This product supports up to WQXGA resolution. |
|
|
|
| ∙ Check the maximum resolution range of the graphics card. |
| |
|
|
|
|
|
www.avenview.com | 6 |
|
|
