Before Installation, Panel Description | Avenview SPLIT-HDSDI-4-RS

1.7Before Installation

∙Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.

∙Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.

∙Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.

∙Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com	5

Image 5

Contents

Models SPLIT-HDSDI-4-RS 4 Port HD/SD-SDI Splitter with ReclockingUser’s Guide Regulatory Notices Federal Communications Commission FCC Table of Contents 1.2 Safety Instructions 1.1 Important Safeguardsreference What the warranty does not cover Section 1 Getting Started 1.6 Package Contents 1.5 Features1.3 Regulatory Notices Federal Communications Commission FCC 1.4 Introduction 1.8 Panel Description 1.7 Before InstallationFRONT PANEL REAR PANEL Automatically reclocks bypassed SDI signals Section 2 InstallationFor to bypass SDI signal Default Operation mode Description Section 3 Specifications Disclaimer