CH SCAN

MORE..

DEFAULT

FAVORITE CH

)

)

)

)

Use CH▲ or CH▼ buttons to select between CH SCAN or All FREQ SCAN. Press Vol► button to make the selection. If you want to interrupt or cancel the scanning process, press MENU button, but this will only memorize the scanned channel.

These two types of channel-preset functions enable you to memorize all active channels in your area.

Use the CH SCAN function first. If there are channels missing after you perform CH SCAN, use ALL FREQ SCAN function and repeat the searching process.

NOTE: ALL FREQ SCAN is a very time consuming process. If the default frequency table already includes all active TV channels in your area, then avoid using the ALL FREQ SCAN.

Press Vol► button to call up MORE.. menu list.

Use the CH▲ or CH▼ buttons to select YES to clear all the preset channels and to restore the original factory default picture setting or NO to exit. Then press Vol►.

This function enables you to add, remove, reprogram or reassign the TV channels with channel numbers that are easier to remember.

In the selected USER CH, enter the new channel number you want to assign or the channel number you want to remove/add to the channel line up. Then, in the CATV CH or TV CH, enter the channel number you want to remap or the channel number you want to remove/add.

Use the CH▲ or CH▼ buttons to select ADD to include or DEL to remove the channel number in the channel line up and then press Vol►.

Note: To browse through channels while setting the USER CH and CATV number, press the CH▲ or CH▼ buttons.

 

SET AREA

 

 

 

 

 

 

 

 

 

Press the MENU button, select MORE, select SET

 

 

 

 

 

)

 

 

 

 

 

AREA in the MORE, list items, use the CH▲ or

 

 

 

 

 

 

 

 

 

 

CH▼ buttons to choose the appropriate country

 

 

 

 

 

 

 

 

 

 

 

 

signal, then press Vol► button to make the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

selection.

 

 

 

 

 

 

 

 

 

 

 

 

If your country is not listed, choose another country

 

 

 

 

 

 

 

 

 

 

 

 

with the same TV system as yours.

 

 

 

 

 

 

 

 

OSD POSITION

 

 

 

 

 

 

 

Use the CH▲, CH▼, Vol◄, and Vol► buttons to

 

 

 

 

 

 

 

 

 

 

 

 

move the frame where you want to set the position

 

 

 

 

 

 

 

 

 

 

 

 

of the MENU, then press MENU.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RESOLUTION

 

 

 

 

 

 

 

Use the CH▲ or CH▼ buttons to select NO to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

restore the original resolution setting or YES to

 

 

 

 

 

 

)

 

 

 

accept the new resolution setting then press Vol►.

 

 

 

 

 

 

 

 

 

If the monitor can not support the new setting, the

 

 

 

 

 

 

 

 

 

 

original setting will be automatically restored after 10

 

 

 

 

 

 

 

 

 

 

seconds or press PC BGM/Res. button of the

 

 

 

 

 

 

 

 

 

 

remote control to switch to different resolution

 

 

 

 

 

 

 

 

 

 

settings.

 

 

 

 

 

 

 

LANGUAGE

 

 

 

 

 

 

Use the CH▲ or CH▼ buttons to select from

 

 

 

 

 

)

 

 

 

different languages then press Vol►.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DISCLAIMER

No warranty or representation, either expressed or implied, is made with respect to the contents of this documentation, its quality, performance, merchantability, or fitness for a particular purpose. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice.

In no event will AVerMedia be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages.

TRADEMARKS

AVerMedia and AVerTV registered trademarks of AVerMedia TECHNOLOGIES, Inc. IBM PC is a registered trademark of International Business Machines Corporation. Macintosh is a registered trademark of Apple Computer, Inc. Microsoft is a registered trademark and Windows is a trademark of Microsoft Corporation. All other products or corporate names mentioned in this documentation are for identification and explanation purposes only, and may be trademarks or registered trademarks of their respective owners.

COPYRIGHT

©2004 by AVerMedia TECHNOLOGIES, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of AVerMedia TECHNOLOGIES, Inc.

9

10