AVerMedia Technologies AVerKey300 Connecting a SCART RGB Monitor

• Attach the Computer Adapter to the other end of the Computer

Extension Cable.

• Connect the Computer Extension Cable with the attached Computer

Adapter to the monitor port on the back panel of your Macintosh or

NEC computer.

2. Connect your Macintosh or NEC monitor to the AVerKey300.

• Disconnect the monitor from the computer.

• Then, attach the Monitor Adapter to the monitor cable. (The

Monitor Adapter is provided as an option.)

• Connect the monitor cable with the attached Monitor Adapter to the

AVerKey300 “VGA OUT” port.

3. If you do not intend to use a computer monitor with your Macintosh

computer, you will need to connect a dummy terminator to the

AVerKey300 “VGA OUT” port. In general, a 14” terminator is

used. A 12” terminator is only used with software that requires it.

Terminators are used with Macintosh and laptops when no external

monitor is used. (12” and 14” terminators are provided as optional

accessories with the AVerKey300.)

4. Plug the supplied AC Power Adapter into the AVerKey300

“POWER” port.

Connecting a SCART RGB Monitor

If you are using a SCART RGB

monitor, connect the monitor to

the SCART RGB port at the

side panel of AVerKey300

using the SCART RGB Cable.

(The SCART RGB Cable is

provided as an optional

accessory cable with the

AVerKey300.)