3.1Menu Function

If the unit is currently recording the video, you may have to stop video recording to

change the settings. To navigate in the OSD menu, press

to call up and exit

from the main menu or sub-menu display. Then use the

▲ and ▼ or

 

 

 

 

 

 

 

 

and

 

buttons to go up and down and select the items in the menu list or

 

 

change the settings. Use the ,

▼ ▼

or

▲

button to enter sub-menu or

make a selection. You can also use the

▼ ▼

and

▼ ▼

buttons to move the

selection to the left and right. The red frame turns yellow when you are making a selection.

OSD MENU

MAIN MENU

 

 

 

 

CAMERA

SELECT

1

2

3

4

RECORD

SELECT

1

2

3

4

RECORD

MODE

D1

 

 

 

VIDEO FORMAT

MPEG4

 

 

 

RECORD

FRAMERATE

10

 

 

 

VIDEO QUALITY

GOOD

 

 

 

RECORD SCHEDULE

 

 

 

 

SUBMENU

 

 

 

 

 

HARD DRIVE SETUP

 

 

 

 

SENSOR

SETUP

 

 

 

 

MOTION SETUP

 

 

 

 

LANGUAGE SETUP

ENGLISH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description

CAMERA SELECT :

Enable/disable the channel number to display the video on the surveillance screen.

RECORD SELECT :

Enable/disable the channel number to record video.

The channels that are enabled in the camera i select setting can only be set for video

recording.

RECORD MODE :

Select D1/CIF recording mode

Under D1 mode, the video recording is in full screen resolution and takes turns from one channel to the next one when Auto Scan enables. Each channel is recorded only at a maximum frame rate of 15fps. User can switch to view the video in single full screen or QUAD screen

Whereas in CIF mode, video recording is at a lower resolution, but each video is recorded in 30fps/25fps (NTSC/PAL). User can switch to view the video in single full screen or QUAD screen

VIDEO FORMAT :

The recorded video is in MPEG4 format.

RECORD FRAME RATE :

Set the number of frames per second to be recorded. Refer to the table below for the available record frame rate settings. The higher the frame rate, it uses more hard disk space.

 

Video Standard

 

 

 

 

Record Mode

 

NTSC

PAL

 

 

 

 

 

 

 

 

 

 

D1

60, 20, 4

48, 20,4

 

 

 

 

 

CIF

120, 60,40, 20, 4

100, 48, 20, 4

 

 

 

 

 

VIDEO QUALITY :

Select the video quality setting from BEST, HIGH, GOOD, MEDIUM, NORMAL or LOW.

Choosing NORMAL allows user to record more hours but the quality of the recorded video is moderate.

16