NV3000/5000/6000(EXP)/7000H User Manual

and register.(also see Appendix A) You will be prompted to enter CD key number, product name, password, and user information. Use this service if the IP address changes each time when you connect to internet.

(5) Remote Control Server

Enable/disable remote control from remote application (ex. CM3000). Enter the remote accessing port in Port column. The default value is 5555.

i

User also can manually run this function. To run, click Start > Programs > DSS >

Tool > Remote Control Server. The

remote control server icon appears on the

taskbar when the remote control server is enabled. (also see Chapter 12)

(6) Network Video Configuration

Set up the video quality and frame rate for viewing and transmitting to the remote program. Scrolling adjust bar to set the Quality level and FrameRate level.

(7) WebViewer Configuration

Activate Enable Anonymous Login to remotely access the DVR server without the need of password

(8) Voice Phone

The Talk to Web-Clientis to use the 2-Way Talk feature that allows the client and server to talk via internet using microphone. Make sure both microphone and speakers work before using this feature. If the Talk to Web-Clientis disabled, the person in the NV DVR server side can only hear the voice from the client side that is when the WebCam 2-Way Talk button is activated. (see also Chapter 8.1 #6).

i

Make sure that your Webcam Digital Signature is updated yearly; else you won’t be

able to access the NV DVR server from the NV DVR WebViewer. To

 

update/download your WebViewer Digital Signature, click Update WebViewer

 

Digital Signature. Make sure your PC is connected to internet.

(9) Network Time Synchronization

Adjust the NV DVR system time same as network time server. Fill in the Time Server IP address or domain name. Select Automatic Synchronize time to set automatic synchronize time on a daily basis. Or, user can click Synchronize Time Right Now to adjust time right away.

(10)Other Configuration - UPnP

Enable UPnP function to automatically configure the port setting on the local network. This function is available when there is UPNP device in the same network. It will write the DVR port information into the router or other network device (see Appendix B)

- Enable White List

An access permit list for the remote accessing of NV DVR server. Enter the IP address and click Add. Or, enter a range of IP address and click Add. To delete the IP from the list, select the IP and click Delete button. To reset the input, click Clear button.

55