Manuals / Brands / Computer Equipment / Switch / Avocent / Computer Equipment / Switch

Avocent 1000R, 2000R 14 To connect an AVRIQ module to each server:, To connect serial devices to the AutoView 1000R/2000R appliance:, To connect an AVRIQ-PEM:

1 72

Download 72 pages, 1.47 Mb

14 AutoView 1000R/ AutoView 2000R Installer/User Guide

To connect an AVRIQ module to each server:

1. Locate the AVRIQ modules for your AutoView 1000R/2000R appliance.

2. Attach the appropriately color-coded ends to the keyboard (violet),

monitor (blue) and mouse (green) ports on the ﬁ rst server you will be

connecting to the appliance.

3. Attach one end of the CAT 5 cabling that will run between your AVRIQ and

AutoView 1000R/2000R appliance to the RJ-45 connector on the

AVRIQ module.

4. Connect the other end of the CAT 5 cable to the desired ARI port on the

back of your AutoView 1000R/2000R appliance.

5. Repeat steps 2-4 for all servers you wish to attach.

NOTE: When connecting a Sun AVRIQ m odule, you must use a multi- sync monitor to

accommodate Sun computers that support bot h VGA and sync-on- green or composite sync .

See Appendix B for more information on the AVRIQ -SRL module.

To connect serial devices to the AutoView 1000R/2000R appliance:

1. Locate an AVRIQ-SRL module.

2. Attach the AVRIQ-SRL 9-pin serial connector to the serial port of t he

device to be connected to your AutoView 1000R/2000R appliance.

3. Attach one end of the CAT 5 cable to the RJ-45 connector on the AVRIQ-

SRL module. Connect the other end of the CAT 5 cable to the desired ARI

port on the back of your AutoView 1000R/2000R appliance.

NOTE: The AVRIQ-SR L module is a DCE device and only s upports VT100 terminal emulat ion.

4. Connect the power supply to the power connector on your AVRIQ-SRL.

The cable expander can be used to power up to four AVRIQ-SRL modules

from a single power supply.

5. Connect the AVRIQ-SRL power supply to an appropriate AC wall outlet.

Power up your serial device.

To connect an AVRIQ-PEM:

1. Locate the AVRIQ-PEM module.

2. Attach one end of a CAT 5 cable to the IN port on the AVRIQ-PEM module.

3. Connect the other end of the CAT 5 cable to the desired ARI port on the

back of your AutoView 1000R/2000R appliance.

4. Attach one end of another CAT 5 cable to one of the eight ports on the

AVRIQ-PEM module.

Contents

Main Page Page Page Table of Contents Page Page Page Chapter 1: Product Overview Features and Benefits AVRIQ and AVRIQ-SRL (serial) modules 4 Access via network connection Point and click control with AVWorks software Safety Precautions 6 UTP cables Page Page Chapter 2: Installation Getting Started Supplied with the AutoView 1000R/2000R Additional items needed 10 Setting up your network Rack Mounting Your AutoView 1000R/2000R To install the 1U switch mounting bracket: Installing the AutoView 1000R/2000R 12 To install the AutoView 1000R/2000R hardware: To con gure the AutoView 1000R/2000R hardware: To adjust the mouse acceleration: For Microsoft Windows NT (using default drivers): For Microsoft Windows 2000/Windows XP (using default drivers): 14 To connect an AVRIQ module to each server: To connect serial devices to the AutoView 1000R/2000R appliance: To connect an AVRIQ-PEM: Adding a legacy KVM switch Legacy Switch Support 16 To add a legacy KVM switch: To connect the network and turn on your AutoView 1000R/2000R: Adding Servers To add server names: Local Port Operation Contents Page Chapter 3: Local Port Operation Controlling Your System at the Local Port Viewing and Selecting Ports and Servers To access the Main dialog box: 20 Viewing the status of your appliance OSCAR Status Symbols Selecting servers To select servers: Soft switching Navigating OSCAR 22 OSCAR Navigation Basics (continued) Configuring OSCAR Setup Features to Con gure OSCAR To access the Setup menu: Assigning Server or Serial Device Names Page Assigning Device Types To access the Devices dialog box: Changing the Display Behavior Controlling the Status Flag 28 To determine how the status ag is displayed: Broadcasting to Servers To access the Broadcast dialog box: To broadcast to selected servers: 30 To turn broadcasting off: Using Scan Mode To add servers to the scan list: To remove a server from the scan list: To start the scan mode: To cancel scan mode: 32 Setting Console Security To access the Security dialog box: To set or change the password: To password protect your console: To log in to your console: To remove password protection from your console: To enable the screen saver mode with no password protection: 34 To exit the screen saver mode: Setting the Keyboard Country Code To set the keyboard country code for Sun servers: Managing Server Tasks Using OSCAR Commands to Manage Routine Tasks for Your Servers 36 Viewing and Disconnecting User Connections To view current user connections: Commands to Manage Routine Tasks for Your Servers (continued) To access the Commands menu: To disconnect a user: Running System Diagnostics 38 Diagnostic Test Details To run diagnostic tests: Resetting Your PS/2 Keyboard and Mouse 40 To reset the PS/2 mouse and keyboard values: Displaying Version Information To display version information: Page Page Page Page Chapter 4: Terminal Operations Configuring the Terminal Applications Menu To access the Terminal Applications menu: 46 To activate security: To change the password: Page Page Appendices Appendix A: FLASH Upgrades Upgrading the AutoView 1000R/2000R To upload a new FLASH le: 50 Upgrading the AVRIQ firmware To simultaneously upgrade multiple AVRIQs: Page 52 Appendix B: Using AVRIQ-SRL Modules AVRIQ-SRL module modes Configuring the AVRIQ-SRL 54 To con gure an AVRIQ-SRL module: Creating an AVRIQ-SRL macro To create a macro: 56 Using History mode To use History mode: Page 58 Appendix C: Unshielded Twisted Pair (UTP) Cabling UTP copper cabling Wiring standards AutoView 1000R/2000R Wiring Standards AutoView 1000R/2000R Wiring Standards (continued) Cabling installation, maintenance and safety tips 60 Appendix D: Technical Specifications Page 62 * Appendix E: Sun Advanced Key Emulation Sun Key Emulation For example: For Stop + A, press and hold Ctrl+Shift+Alt and press Scroll Lock, then F1 + A. Special considerations for Japanese and Korean Sun USB keyboards (AVRIQ-USB modules only) PS/2-to-USB Keyboard Mappings 64 Appendix F: Technical Support Page 590-258-002D For Technical Support: