AXIS NetPilot
AXIS NetPilot is the recommended configuration and management tool for NetWare networks. You can use it to do the following:
•Change the print server parameter settings for several network protocols
•Monitor printers and view detailed printer information
•Simplify administration by setting up print servers in logical groups (for example, under Sales or Accounts).
•Update software
FTP
If your network supports TCP/IP, you can also use FTP to access the config file stored in the print server’s memory.
1. Log in to the AXIS 1440 by typing the following command:
ftp <host name>
2.Enter root as the user id, and pass as the password.
3.To upload the config file, type the following command:
get config
4.Edit the file using your preferred text editor.
5.Download the config file to the AXIS 1440 by typing the following command:
put config CONFIG
where config is the name of the edited file.
Note:
❏You must type CONFIG in capital letters. Otherwise, your edits will be lost when the AXIS 1440 is turned off.
Other tools:
You can also use NetWare Administrator or PCONSOLE to manage your print servers on a NetWare network. See your Novell documentation for more information.
Updating the Software
You can obtain free software updates from the following sources:
•EPSON Home Page on the Internet (http://www.epson.com)
•EPSON FTP site on the Internet (log in to ftp.epson.com as anonymous FTP)
For more information about how to update the software, see Section 10 in the AXIS 1440 User’s Manual.