Axis Communications M1025 manual Use only spare parts provided by or recommended by Axis

Models: M1025

1 20
Download 20 pages 12.5 Kb
Page 6
Image 6

could cause damage to the product.

Only use applicable tools when installing the Axis product; excessive force could cause damage to the product.

Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning.

Use only accessories that comply with technical specification of the product. These can be provided by Axis or a third party.

Use only spare parts provided by or recommended by Axis.

Do not attempt to repair the product by yourself, contact Axis or your Axis reseller for service matters.

This Axis product shall be used in compliance with local laws and

regulations.

Conservez le produit Axis dans un environnement sec et aéré.

Évitez d'exposer le produit Axis aux vibrations, aux chocs ou à une forte pression. N'installez pas le produit sur un support instable, ou des surfaces ou des murs instables ou vibrants, car cela pourrait l'endommager.

N'utilisez que les outils applicables pour installer le produit Axis ; une force excessive pourrait endommager le produit.

Pour le nettoyage, n’utilisez ni produits chimiques, ni substances caustiques ou aérosols. Utilisez un chiffon humide pour le nettoyage.

N’utilisez que des accessoires conformes aux caractéristiques techniques du produit. Ceuxci peuvent être fournis par Axis ou par

un fournisseur tiers.

Utilisez uniquement des pièces de rechange fournies ou recommandées par Axis.

Ne tentez pas de réparer le produit vous-même, contactez Axis ou votre revendeur Axis pour toute

réparation.

Ce produit Axis doit être utilisé conformément aux lois et réglementations locales en vigueur.

Lagern Sie das Axis-Produkt in einer trockenen und belüfteten Umgebung.

Setzen Sie das Axis Produkt keinen Vibrationen, Erschütterungen oder starkem Druck aus. Installieren Sie das Produkt nicht an instabilen Halterungen oder instabilen oder vibrierenden Oberflächen oder Mauern, da dadurch das Produkt beschädigt werden könnte.

Verwenden Sie bei der Installation des Axis Produkts nur geeignetes Werkzeug; zu hoher Kraftaufwand kann das Produkt beschädigen.

Verwenden Sie keine chemischen, ätzenden oder aerosolhaltigen Reinigungsmittel.

Verwenden Sie zur Reinigung ein feuchtes Tuch.

Verwenden Sie nur Zubehör, das den technischen Spezifikationen des Produkts entspricht. Dieses ist von Axis oder Drittanbietern erhältlich.

Verwenden Sie nur Ersatzteile, die von Axis empfohlen bzw. bereitgestellt wurden.

Versuchen Sie nicht, das Produkt

Page 6
Image 6
Axis Communications M1025 manual Use only spare parts provided by or recommended by Axis