Axis Communications M1031-W manual Wireless Settings, Security select one of the following methods

Page 16 AXIS M10 Series

Wireless Settings

1.Select an access point or ad-hoc device under Status of Wireless Networks; some of the required information will automatically be entered under Wireless Settings.

2.SSID is the name of the selected wireless network. Leave this field blank if AXIS M1011-W/M1031-W is to access the nearest unsecured network.

3.Network type - select Master to access the network via an access point or Ad-hocto access any other wireless device and create a local network (see note below).

4.Security - select one of the following methods:

•WPA-/WPA2-PSK

•WPA-/WPA2-Enterprise - see instructions below

•WEP - see instructions below

•No security (not recommended)

Keys, passphrases and certificates that are used for security must be entered manually. To retrieve the necessary details, contact the Network Administrator for the selected access point or ad-hoc device.

5.Click Save.

Note: Ad hoc mode allows users to form a wireless LAN without connection via an access point. The camera can, for example, con- nect point-to-point to a laptop with wireless network support. Ad- hoc connection may be useful in certain installations but is not the recommended method.

WPA-/WPA2-PSK - Enter the required Pre-shared Key for the access point, which can be a hexidecimal number (Manual hex) or a passphrase.

WPA-/WPA2-Enterprise - Choose the type of client/server authentication being used by the access point; EAP-TLS.